Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Chesapeake?
In Chesapeake, most gate parts and welding jobs run $180 to $850, with the typical repair landing near $350 to $550 once parts and labor are combined. A single hinge or latch weld sits at the low end, while a bent post, a full panel rebuild, or a slide gate that has come off its track pushes toward the top. The written estimate sets the final price, and we give it free before any work starts.
We work on the brand you already have. Whether that’s a Mighty Mule swinging gate at a Deep Creek driveway or a DoorKing system at a commercial entrance off Battlefield Boulevard, the parts cost depends on what the system actually needs, not on which product line someone is trying to sell. Our technicians have up to 13 years of experience, and they diagnose by system knowledge rather than guesswork.
Key Takeaways
- Most residential gate parts and welding repairs in Chesapeake fall between $180 and $850.
- Welding a hinge or latch is usually the cheapest fix; a bent or cracked post is the most expensive repair on the list.
- Parts pricing depends on the brand and the system type, not on where the gate sits.
- We handle both manual and automated gates, residential and light commercial, under one call.
- Estimates are free, and the written estimate is what governs the final price.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what the main parts and welding categories typically run in the Chesapeake market this year. These are estimates for the work described, and every job gets its own written price after we look at the gate.
| Item | Typical Cost Range | Notes |
|---|---|---|
| Hinge weld or re-hang | $180 – $320 | Cut, align, re-weld, and check swing clearance |
| Latch and striker repair or weld | $180 – $300 | Includes adjustment so the gate latches cleanly |
| Post repair or reinforcement weld | $300 – $650 | Bent, leaning, or cracked post; footing depth matters |
| Gate frame crack repair | $250 – $550 | Depends on how much of the frame is compromised |
| Panel replacement (single leaf, metal) | $450 – $850 | Material and size drive the range |
| Roller, track, and guide wheel replacement | $200 – $450 | Slide gates; includes re-alignment |
| Operator arm, motor, or control board replacement labor | $250 – $600 labor | Parts quoted separately by brand |
| Keypad, sensor, or safety loop repair | $200 – $500 | Equipped for motors, control boards, keypads, and sensors |
| Full custom gate fabrication and install | $2,500 – $8,000+ | Design, materials, fabrication, and installation |
What pushes a gate parts and welding job up or down in Chesapeake comes down to a few things. Material is one: aluminum and steel price out differently, and a frame that has been patched before takes longer to weld cleanly. Access is another. A gate set back on a long driveway in Hickory or Great Bridge is a straightforward job, while a tight urban lot with a narrow swing path or a gate that has to come off its hinges before we can weld it adds time. Brand and system type matter for parts, since a Ghost Controls residential operator and a FAAC commercial arm don’t share components. And whether the gate is manual or automated changes the scope, because anything touching an operator, control board, or safety sensor has to be tested as a whole system, not just welded back together.
If the failure is electrical rather than structural, that’s a different conversation. We run a dedicated electric gate repair service, so a gate that has stopped moving because of a dead motor or a failed control board gets handled by the same team that does the welding. One call covers the whole job.
What Affects Gate Parts & Welding Pricing in Chesapeake
- Gate material and thickness. Steel and aluminum weld differently, and a heavier gauge frame takes more time to repair properly than a thin one. Thicker material often means fewer future repairs, but it costs a little more up front.
- Which brand and system you have. We’re familiar with nine gate brands, from Mighty Mule and Ghost Controls at the residential end up to FAAC, BFT, and DoorKing for commercial systems. A common operator part costs less than a specialty control board, and knowing the system going in keeps diagnosis time down.
- Manual vs. automated. A manual gate repair is mechanical work. An automated gate adds motor, control board, keypad, and safety sensor checks, which is why a stopped electric gate often costs more to diagnose than a squeaky hinge.
- Residential vs. light commercial. Commercial gates on HOA entrances and property-manager sites tend to be heavier, larger, and used far more often, so components wear faster and parts run higher. We handle both categories, so the estimate reflects what the gate actually is.
- Access and site conditions. A gate that has to be taken down, moved, or worked on in a cramped space takes longer than one with clear room around it. Chesapeake’s mix of long suburban driveways and tighter in-town lots means access varies block to block.
- Whether it’s a repair or a replacement. Repairing a hinge or welding a crack almost always beats replacing a whole gate. When the frame or post is too far gone, replacement becomes the honest answer, and we’ll tell you which one actually makes sense.
How to Save on Gate Parts & Welding
The biggest lever on cost is catching a problem early. A hinge that starts to sag or a latch that drags is a cheap weld; left alone, it works the frame loose and turns into a post repair. If you notice the gate catching, dragging, or swinging unevenly, get it looked at before it gets worse.
A few practical ways to keep the number down:
- Fix the small stuff first. Replacing a worn roller or re-welding a hinge now is far cheaper than rebuilding a frame later.
- Get the whole gate checked in one visit. Since we’re already on site, having us look at hinges, latch, post, and operator together avoids paying for a second trip to find the next problem.
- Know your brand. If you can tell us the operator brand and model, we can come prepared and cut diagnosis time. From Mighty Mule to FAAC, the more we know going in, the tighter the estimate.
- Ask repair-or-replace directly. We’re brand-agnostic and recommend based on your system and budget, not on which product line pays a distributor. Sometimes the cheaper answer really is the right one.
- Get the estimate in writing before work starts. The written estimate sets the final price, so there are no surprises once the gate is off its hinges.
Estimates are free. If you’re not sure whether your gate needs a weld, a part, or a new operator, call (833) 323-1302 and we’ll tell you straight.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Chesapeake?
Gate welding in Chesapeake typically runs $180 to $650. A simple hinge or latch weld sits at the low end around $180 to $320, while a bent post or a cracked frame that needs reinforcement lands higher, usually $300 to $650. The exact price depends on the material and how much of the frame is involved, and the written estimate sets the final number. Call (833) 323-1302 for a free quote.
Is it cheaper to repair a gate or replace it?
Repair is almost always cheaper when the frame and posts are sound. A $250 to $550 weld repair beats a $2,500 and up replacement every time. Replacement only makes sense when the post is failing, the frame is cracked in several places, or the gate is beyond safe use. We’ll tell you which one actually makes sense for your gate, and the estimate is free. Call (833) 323-1302.
How much do gate operator parts cost in Chesapeake?
Operator part repair labor in Chesapeake typically runs $250 to $600, with the part itself quoted separately by brand. A keypad, safety sensor, or control board fix usually sits between $200 and $500. Because we’re familiar with nine brands, including LiftMaster, Linear, Viking, Elite, and DoorKing, we can often identify the failed part on the first visit rather than ordering and guessing. Call (833) 323-1302 for an estimate.
Can you fix my gate the same day?
Same-day service is often possible for common parts and welding repairs when the part is on hand. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 323-1302 to check availability for your gate.
Do you work on my gate brand?
Yes. We’re trained on nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That spans entry-level residential systems and commercial-grade operators, so whether your gate is a Mighty Mule at home or a FAAC at a commercial entrance, we work on the brand you already have. Call (833) 323-1302 and tell us what you’ve got.
What does a new gate cost in Chesapeake?
A full custom gate fabrication and install in Chesapeake typically runs $2,500 to $8,000 or more, depending on size, material, and whether an operator is included. Since the same team that repairs gates also designs and installs them, you’re not sourcing a separate contractor for a new gate. The written estimate covers design through installation. Call (833) 323-1302 to talk through your project.
Getting an Accurate Gate Parts & Welding Estimate in Chesapeake
Pricing a gate repair starts with knowing what’s actually wrong. A gate that won’t latch, a post that’s leaning, a motor that’s dead, or a slide gate that’s jumped its track all point to different parts and different labor, and guessing at it over the phone usually costs more than it saves. That’s why the estimate comes after we’ve looked at the gate, and why it’s free.
We handle the whole job under one call: mechanical welding and parts, electric gate repair for motors, control boards, keypads, and sensors, and new gate installation when replacement is the better answer. Residential and light commercial, manual and automated, from Mighty Mule to FAAC. If you’re in Chesapeake and your gate needs attention, we’ll tell you what it needs, what it costs, and whether repair or replacement makes more sense.
Call (833) 323-1302 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’d like to read more about what we handle first, start with gate repair Chesapeake, or see our full Chesapeake service coverage for the surrounding area.
Pricing reflects the Chesapeake market as of 2026. Gate Repair Chesapeake offers free estimates – call (833) 323-1302.
Written by the team at Gate Repair Chesapeake.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Tamika Carter"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Emily Park"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Alejandro Vargas