Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Chesapeake?
Gate repair in Chesapeake typically runs $150 to $2,400, with most residential repairs landing between $200 and $650. A simple hinge adjustment or remote reprogram usually costs $150 to $220, while a control board replacement or slide-gate track repair climbs toward $550 to $900. Commercial swing and slide operators from brands like DoorKing and FAAC can reach $1,200 to $2,400 when the motor and controls both need work.
Those are estimated ranges for the Chesapeake market in 2026. The written estimate that follows our on-site look at your gate sets the final price, and that estimate is free.
Key Takeaways
- Most Chesapeake residential gate repairs cost $200 to $650.
- Electric gate problems are the biggest cost driver: motors, control boards, and safety sensors span $250 to $1,400.
- Manual gate fixes stay cheaper: hinges, latches, and post alignment run $150 to $500.
- Your brand matters. We work on the brand you already have, from Mighty Mule to FAAC.
- Call (833) 323-1302. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Repair Cost Breakdown (2026)
Here’s how the pieces break down. The table groups the repairs we handle in Chesapeake by system type, so you can find your situation and see what a typical range looks like.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Hinge, latch, or roller replacement | $150 – $320 | Mechanical swing-gate hardware, manual and light automated |
| Gate sagging or post alignment | $200 – $550 | Sagging swing gates, misaligned latch posts, track adjustments |
| Remote or keypad not working | $150 – $400 | Receiver, remote pairing, keypad replacement, wiring checks |
| Safety sensor or photo-eye repair | $200 – $450 | Blocked or misaligned photo-eyes, wiring, loop sensor issues |
| Electric gate motor repair | $400 – $900 | Residential swing and slide operators |
| Control board replacement | $350 – $800 | Residential control boards, surge and moisture damage |
| Commercial operator repair | $800 – $1,800 | High-cycle commercial operators, heavier duty motors |
| Slide gate off track or on-track repair | $300 – $900 | Track re-alignment, roller replacement, catching gate panels |
| Full electric motor and controls replacement | $1,200 – $2,400 | Commercial-grade full operator replacement |
What pushes a repair toward the top of those ranges? Two things usually: the type of operator and how long the problem was left alone. A residential swing operator on a Ghost Controls or Linear system that’s had a dead remote for a week is a quick diagnosis. A commercial DoorKing slide operator that’s been binding for months may have chewed through a control board and a motor in one go. That’s the difference between a $300 job and an $1,800 job.
What pulls it down? A clear fault. If you can tell us the gate won’t open but the motor hums, or the gate opens only partway then reverses, we know what to look for before we arrive. Specifics save time.
What Affects Gate Repair Pricing in Chesapeake
Pricing in Chesapeake works the same way it does anywhere in Hampton Roads, with a few local wrinkles. Here’s what moves the number:
- Manual versus electric. Manual gate repairs are almost always cheaper because there are fewer parts. Hinges, latches, and gate sag stay in the $150 to $550 range. Once a motor, control board, or safety sensor is involved, the job shifts into $250 to $1,400 territory. Electric gate repair is its own category, not an add-on. We’re equipped for the electrical side, and that’s why we don’t quote electric problems like handyman work.
- The brand on your gate. A Mighty Mule or Ghost Controls residential operator behaves differently under diagnosis than a FAAC or BFT commercial unit. We’ve trained technicians on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we aren’t guessing at the wiring diagram. Brand-agnostic doesn’t mean brand-blind.
- Property type. A single driveway gate for a Chesapeake homeowner and a community entrance operator for an HOA or property manager carry different duty cycles. Commercial operators run more cycles per day, which wears parts faster and typically lifts repair costs into the $800 to $1,800 range. HOAs and property managers in Chesapeake deal with this constantly, especially at high-traffic community entrances.
- Age and condition of the gate itself. A newer gate with a failed motor is a clean swap. A gate that’s been fighting with a misaligned post for a season is two repairs. If the frame is bent or the track is worn, we may need to fix the structure before the operator will work correctly.
- Access and installation layout. Gate operators buried behind landscaping, wiring run across long driveways, or control boxes mounted in awkward spots add labor. If we need to trace a buried sensor loop or dig out a junction box, that’s time on the site visit and it’s reflected in the estimate.
- How specific you can be about the symptom. This one’s on the customer side. “The gate isn’t working” costs more to diagnose than “the gate opens halfway and stops.” A precise symptom shortens diagnosis and usually pulls the price down.
Chesapeake weather plays its part too. Humid summers and the occasional heavy storm season push water into control enclosures and stress outdoor wiring. The thunderstorms that roll through during the warmer months are a common cause of control board failures, and lightning activity in the area has a way of taking out receivers and sensors that were fine the day before. We can’t stop that, but we can diagnose it fast and tell you what actually failed.
How much does electric gate repair cost in Chesapeake?
Electric gate repair in Chesapeake typically costs $250 to $1,400, depending on whether the fault is a sensor, a control board, or the motor itself. Motor repairs sit around $400 to $900 for residential systems, control board replacement around $350 to $800, and sensor or photo-eye work around $200 to $450. Commercial-grade operators from brands like DoorKing, FAAC, and BFT push the top of the range toward $1,800.
Electric gate stopped working? Here’s the order we usually work in: sensors first, then keypad and remote, then control board, then motor. Most failures are in the first two categories, which is good news for your wallet. We’ll tell you which one it is before any work starts. Call (833) 323-1302 for a free estimate.
How much does gate installation cost in Chesapeake?
New gate installation in Chesapeake generally runs $1,800 to $6,500 for a residential automated gate and higher for commercial entrances, depending on the operator, the gate material, and the runs of wiring needed. A basic manual driveway gate with hardware sits at the lower end; a fully automated swing gate with keypad, safety sensors, and new concrete footings lands in the middle; a commercial slide operator for an HOA entrance goes above that.
Because the same team handles both repair and installation, you don’t need to source a separate contractor for the wiring, the operator, and the gate itself. One call covers the whole job. If you’re weighing whether to fix the gate you have or replace it, we’ll tell you which one actually makes sense for your budget and your property. Call (833) 323-1302 for a free on-site estimate.
Can you repair a gate the same day in Chesapeake?
Often, yes. Many common failures, like a remote that won’t pair, a misaligned photo-eye, or a hinge that’s worked loose, are repaired on the first visit. Complex jobs that require a specific control board or commercial operator part may need a follow-up once the part is in hand, and we’ll tell you which category your repair falls into when we schedule.
Our teammates have up to 13 years of experience on gate systems, which means diagnosis usually happens fast. We answer the phone 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your gate fails and you call outside dispatch hours, we book you into the next opening. Call (833) 323-1302.
How to Save on Gate Repair
There’s no magic here, just a few habits that add up:
- Get a free estimate first. We don’t charge for the estimate, and the number on the written estimate is the price you pay. Call (833) 323-1302 and we’ll schedule an on-site look at your gate.
- Describe the symptom precisely. “The gate opens six inches and reverses” gives us a diagnosis path. That shortens time on-site, and shortens the job.
- Don’t let a small fault ride. A binding track or a sagging hinge that gets ignored will eventually take the motor with it. A $300 hinge and alignment job is cheaper than a $900 motor repair. This is the single biggest cost saver in the trade.
- Test the remote and keypad before calling. Reprogramming a remote or replacing a battery costs nothing to check. If that’s all it is, we’ll tell you and you can decide whether you even need a visit.
- Ask about repair versus replace honestly. A gate with a solid frame and a failed operator is almost always worth repairing. A gate with a bent structure and a dead motor may not be. We’ll give you the straight answer, not the one that runs up the invoice.
- Keep the area around the gate clear. A photo-eye blocked by weeds or a slide track clogged with leaves is a false alarm, and a false alarm that turns into a real fault if it isn’t cleared. This one is free.
If you’d like a look at what we handle on the repair side, our gate repair page walks through the systems we work on. For everything else, start with Gate Repair Chesapeake and we’ll point you to the right next step.
FAQs – Gate Repair Cost
How much does a gate repair cost in Chesapeake?
Gate repair in Chesapeake typically costs $150 to $2,400, with most residential jobs landing between $200 and $650. The range depends on whether the fault is mechanical or electrical, and on the brand and duty cycle of your operator. Call (833) 323-1302 for a free estimate.
Is it cheaper to repair or replace a gate in Chesapeake?
Repair is almost always cheaper in Chesapeake when the gate frame and posts are sound. A repair at $200 to $900 beats a new installation at $1,800 to $6,500 unless the structure itself is failing. We’ll inspect the frame and the operator and tell you which makes sense for your budget. Call (833) 323-1302 to get started.
Do you charge a service or diagnostic fee?
No. The estimate is free, and the price is set per job by the written estimate. You’ll know the number before any work begins. Call (833) 323-1302 and we’ll schedule a look at your gate.
What’s the most common gate repair in Chesapeake?
Misaligned safety sensors and dead remotes are the most common gate repairs we see, and both typically cost $150 to $450. Control board failures after a storm are next, at around $350 to $800. Diagnosis starts with those first two categories because they’re the most frequent and the cheapest to fix. Call (833) 323-1302.
Can you work on my specific gate brand?
Usually, yes. We’ve trained technicians on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we work on the brand you already have. We aren’t tied to one product line, so our repair recommendation is based on your system and budget, not brand affiliation. Call (833) 323-1302 and we’ll confirm your system.
What does it cost to fix a gate that won’t open at all?
A gate that won’t open at all typically costs $250 to $900 to fix in Chesapeake. It could be a dead battery in the remote, a tripped safety sensor, a failed control board, or a seized motor, and the diagnosis tells you which. The good news is that the first two causes are the cheapest. Call (833) 323-1302 for a free estimate.
Do you handle commercial gate repair as well as residential?
Yes. We handle both residential and light-commercial gate systems, so HOAs, property managers, and homeowners all work with the same team. Commercial operator repairs typically run $800 to $1,800, and full replacement of a commercial motor and controls can reach $2,400. Call (833) 323-1302 to schedule a free on-site estimate.
What Happens When You Call
When you call, we’ll ask what the gate is doing, what brand and type it is, and whether it’s manual or electric. Then we schedule the on-site estimate. On-site, we trace the fault, give you a written price, and let you decide. No upselling, no pushing one brand over another, and no work done until you’ve approved the number.
Repair or replace, from Mighty Mule to FAAC, residential to commercial, we cover the whole job with one call. Call (833) 323-1302 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Chesapeake market as of 2026. Gate Repair Chesapeake offers free estimates – call (833) 323-1302.
Written by the team at Gate Repair Chesapeake.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Tamika Carter"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Emily Park"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Alejandro Vargas